Rheo-NMR Specifications
Accessory Specifications
- Supply Voltage: 90-240 VAC, 50-60 Hz
- Motor Speed Range: 0.1 to 14 Hz
| Rheometer Type |
Dimensions |
Material |
Shear Rate (s-1) at 4.74 Hz |
|---|---|---|---|
| Cone and Plate | Cone: 16 mm or 24 mm Angle: 4° or 7° |
Machinable glass (smooth) |
426 |
| PEEK Couette Cell |
ID: 19 mm OD: 17 mm |
PEEK (smooth or hatched) |
253 |
| PEEK Couette Cell |
ID: 19 mm OD: 18 mm |
PEEK (smooth or hatched) |
536 |
| Glass Couette Cell |
ID: 7.0 mm OD: 4.0 mm |
Smooth glass cylinder, Teflon bushes |
40 |
| Glass Couette Cell |
ID: 9.0 mm OD: 5.0 mm or 7.5 mm |
Smooth glass cylinder, Teflon bushes |
37 or 149 |
NMR Spectrometer Requirements
- The Rheo-NMR system is designed to work with the Bruker Widebore microimaging probe built by CMR, Queensland, Australia.
- The Rheo-NMR System is compatible with both Bruker AMX and Avance consoles.
- There are two versions of the Rheo-NMR system, depending on the style of the upper shim barrel of your probe.
- A modification to the resonator may be necessary for resonators delivered before November 2002 (these have white PTFE end caps).
The Rheo-NMR accessory is available for purchase through Bruker BioSpin.
For purchase information or if you have any questions please do not hesitate to contact magritek now.